Bathroom plumbing repair for toilets, faucets and showers

Why bathroom repairs deserve prompt attention

Bathrooms concentrate water use in a small space, often above finished ceilings. A slow leak behind a vanity or under a toilet can damage flooring, subfloor and ceilings below long before it becomes obvious.

Running toilets and dripping faucets also waste significant amounts of water over time. Fixing them early saves water, prevents damage and keeps fixtures working reliably.

Bathrooms also contain some of the most frequently used valves in the house. Each time a faucet is turned or a toilet refills, small parts move and wear. Knowing which parts wear first makes repairs faster and more predictable.

Running and leaking toilets

A toilet that runs constantly or refills on its own usually has a worn flapper, a misadjusted float or a failing fill valve. Water slowly leaking from the tank into the bowl triggers periodic refills that many people notice as a hiss or trickle.

Replacing the flapper, adjusting the chain and float or installing a new fill valve typically resolves these issues. The technician checks the flush valve seat for damage that could prevent a good seal.

Water around the base of a toilet can indicate a failed wax ring or loose closet bolts. Resetting the toilet with a new seal stops the leak and protects the floor and ceiling below.

Faucets that drip or leak

Faucet drips come from worn cartridges, washers or seals, depending on the faucet design. Identifying the brand and model helps us source the correct parts.

Leaks under the sink may come from supply line connections, the faucet body or the drain assembly. Tracing water to its source prevents unnecessary replacements.

When a faucet is old, corroded or no longer supported with parts, replacement may make more sense. We give you both options with prices.

Showers and tubs

Shower valves control water mixing and temperature. Pressure-balancing and thermostatic valves help protect against sudden temperature changes. Worn cartridges can cause drips, temperature swings or difficulty adjusting the handle.

Low shower pressure often comes from mineral buildup in the showerhead or flow restrictor. Cleaning or replacing the showerhead may resolve it. If pressure is low throughout the house, the cause is elsewhere in the system.

Leaks around tub spouts, handles and trim can allow water into the wall. Resealing trim and replacing worn parts prevents hidden damage.

Supply lines and shutoff valves

Flexible supply lines connect toilets and faucets to the water supply. Older or poor-quality lines can burst suddenly. Replacing aging lines with quality braided connectors is a simple preventive step.

Shutoff valves under sinks and behind toilets let you stop water to a fixture in an emergency. Many older valves seize or leak when turned. We test them during repairs and recommend replacement when they no longer work reliably.

Knowing where your main water shutoff is located is also important. The technician can show you if you are unsure.

Slow drains and stoppers

Bathroom sink and tub drains slow down when hair and soap residue accumulate. Pop-up stoppers and tub drain assemblies often collect debris and need cleaning or adjustment.

Leaks at the drain assembly or trap can appear under the sink. Replacing worn washers or tightening connections usually resolves them.

When drains in several fixtures are slow, the blockage may be further down the line, and our Drain Cleaning service can clear it.

Water pressure problems

Low pressure at one fixture usually points to a clogged aerator, showerhead or cartridge. Low pressure at all fixtures may indicate a pressure regulator issue, a partially closed main valve or problems with the supply piping.

High water pressure can also be a problem, stressing fixtures and supply lines and contributing to leaks. A pressure test can show whether a regulator is needed or needs adjustment.

Diagnosing the pattern of pressure problems helps target the right fix.

Hidden leaks and water damage

Signs of hidden bathroom leaks include stained ceilings below, soft or discolored flooring, loose tiles, peeling paint and musty odors.

Tracking down hidden leaks may involve checking fixture connections, running water in specific fixtures and observing where water appears. Access may be needed through a panel or ceiling.

Once the leak is stopped, affected materials may need drying or replacement. We can point you toward appropriate restoration help when damage is significant.

Choosing replacement fixtures

When fixtures need replacing, water efficiency, ease of cleaning and parts availability are worth considering. Many modern toilets and faucets use less water while performing well.

We can install fixtures you have purchased or discuss options suited to your bathroom. Compatibility with existing rough-in dimensions and valves matters.

Installation includes new supply lines and seals as appropriate and a check for leaks before we leave.

Toilet parts, water use and flushing performance

Toilets that flush weakly or need two flushes may have a partially clogged rim or siphon jet, an incorrectly set water level or a flapper that closes too early. Mineral deposits in hard water areas often restrict the small openings under the rim that direct water into the bowl, and cleaning them can restore a strong flush.

Replacement parts are chosen to match the toilet's design. Using a generic flapper on a toilet that needs a specific one can cause leaks or weak flushing, so we identify the model where possible and use compatible components. Dual flush mechanisms and pressure-assisted toilets have their own parts and adjustments.

A simple dye test in the tank reveals silent leaks into the bowl. If color appears in the bowl without flushing, water is escaping past the flapper, and repairing it can save a surprising amount of water over a year.

Caulk, grout and the water that gets past them

Not every bathroom leak comes from a pipe. Failed caulk around tubs, shower pans and sinks lets water run behind surfaces every time the fixture is used. Over months, that water can rot subfloors and stain ceilings just as a plumbing leak would.

When a ceiling stain appears below a bathroom, we check both the plumbing connections and the surfaces around fixtures. Running water in specific locations and watching for drips below helps separate a plumbing fault from a sealing problem.

Where caulk has failed, replacing it with a suitable bathroom sealant after the area dries is a simple repair. Where water has damaged materials behind tile or flooring, we explain what we see and recommend the right tradesperson if the repair extends beyond plumbing.

Bathroom plumbing problems to watch for

These issues are worth fixing before they grow.

How a bathroom plumbing repair is handled

Clear steps from diagnosis to verification.

1. Diagnosis

   The fixture and connections are inspected to find the source of the problem.

2. Written price

   You receive a price for the repair before work begins.

3. Protection

   Floors and surfaces are protected before fixtures are disassembled.

4. Repair

   Worn parts, seals, valves or lines are replaced with quality components.

5. Leak check

   Water is turned back on and connections are checked for leaks.

Customers on their bathroom repairs

Bathroom plumbing questions

Other plumbing services